Itel A22 Signed_Firmware_100%_Clean Tested ok



Itel A22 Signed_Firmware_100%_Clean Tested ok

  • Today am going to show how to flash Infinix X622
    with Qfil, NCK Qualcomm Module, UMT Quacomm tool

    1. Download the firmware and unzipped it on your desktop
    2. Download  And install Qfil tool Setup And driver Here
    3. Now unzipped all your downloaded drivers and Qfil tool and install it,
    4. The next step now open your qfil flash tool 
          5. now search your phone test-point or used up and down vol key by pressing them together and
    connect your cable 

    6. now click on browse to load your loader and select prog_emmc_firehose 
    7. the next step, go to Loader XML and select rawprogram0 and it we pop up something 
    like this patch0 select it also
    8. lastly click on download and wait for the processing bar to finish, your phone will
    automatically come up. Now you are good to go

    enjoy your work do.

  • Post a Comment